Herr Engineering
Scout
| Wingspan: | 30 inches |
| Wing Area: | 142.5 sq. inches |
| Wingloading: | 5.9 oz. / sq. ft. |
| Weight: | 5.84 oz. |
| Motor: | Maxx Prod. EPU3 with 3.5: 1 gearbox |
| ESC: | Castle Creations Pixie 20 with light leads |
| Battery: | 7 cell Maxx Products 220 mah Nmh |
| Prop: | GWS 8 x 4.3 |
| Servos: | Hitec HS 50 for R/E |
| RX: | Maxx Products MX 6800 Pico RX |
| Where to get: | Sig Manufacturing |
What a blast to build and fly! You can see the complete review of the Scout at The E Zone. This model was designed as a rubberband free flight model. The conversion to electric flight was quite simple. Basically, the equipment is what would be used in a Lite Stick / Pico Stick except gearbox ratio is different. Aerobatics are limited to loops; continuous loops from level flight are no problem.. I have lots of fun just flying right in front of me in figure eights and such.